AGS-7/1 Aerosol Fire Extinguisher
|65 m3||90 sec||5,8 kg
DESIGN: AGS-7 series aerosol fire extinguishers generate dry aerosol cloud which extinguishes fire upon reaching necessary concentration in protected volume. AGS-7 series aerosol fire extinguishers are made in a shape of a metal cylinder with a nozzle cap at the top and injector attached to it. Thanks to injector the aerosol is mixed with air, which significantly reduces the temperature of aerosol stream. AGS-7 series aerosol fire extinguishers are manufactured in two different sizes - AGS-7/1 and AGS-7/2, with protected volumes of 65 m3 and 135 m3 correspondingly. Modifications also differ by dimensions and weight. Please see tech specs for details.
OPERATION: Electric signal activates the starter unit screwed into aerosol fire extinguisher which ignites the aerosol forming cartridge. Aerosol cartridge produce large volume of fire extinguishing aerosol streaming through the cooling layer and coming out of fire extinguisher through the nozzles. Thanks to its unique properties aerosol stops the fire and prevents following reignition.
APPLICATION: AGS-7 series aerosol fire extinguishers are recommended for use in wide range of applications as executive modules of automatic fire extinguishing systems for protection of the premises of medium and large volumes.
WARRANTY: Manufacturer guarantees that fire extinguisher conforms to declared technical specs and standards if the consumer strictly follows the Instruction Manual.
Warranty period – 18 months
Operation life – 5 years
Service life – 10 years
Basic specs Fire classes Protected volume 65 m3 Operating time 90 ± 5 sec Net Weight of extinguisher 5,8 kg Net Weight of aerosol forming compound 3,4 kg Overall dimensions Diameter 205 mm Height 355 mm Starter type VR-7.5, VRTH VEL, VELTH Starter electric impedance 7,5 Ohm 2,5 – 4 Ohm Starting impulse minimum current 1A 0,4 A Starting impulse voltage 8 – 30 V 1,5 – 24 V Starting impulse duration Not less than 1,5 sec Not less than 0,1 sec Startup delay < 1,5 sec Operating conditions Temperature ± 50 °С Humidity up to 98 % Acceleration at frequency range up to 100 Hz 0,5g
Certificates available on request. Please complete the form below.
Manual is available on request. Please complete the form below.