AGS-6/2 Aerosol Fire Extinguisher
|52 m3||45 sec||12,5 kg
DESIGN: AGS-6/2 aerosol fire extinguisher generates dry aerosol cloud which extinguishes fire upon reaching necessary concentration in protected volume. AGS-6/2 aerosol fire extinguisher has steel cylinder body with nozzles on the side surface. AGS-6/2 aerosol fire extinguisher has protected volume 52 m3. Outer aerosol stream temperature is lowered by contact cooler.
OPERATION: Electric signal activates the starter unit screwed into aerosol fire extinguisher which ignites the aerosol forming cartridge. Aerosol cartridge produce large volume of fire extinguishing aerosol streaming through the cooling layer and coming out of fire extinguisher through the nozzles. Thanks to its unique properties aerosol stops the fire and prevents following reignition.
APPLICATION: AGS-6/2 aerosol fire extinguisher is recommended for protection of the premises of medium volume.
WARRANTY: Manufacturer guarantees that fire extinguisher conforms to declared technical specs and standards if the consumer strictly follows the Instruction Manual.
Warranty period – 18 months
Operation life – 5 years
Service life – 10 years
Basic specs Fire classes Protected volume 52 m3 Operating time 45 ± 4,5 sec Net Weight of extinguisher 12,5 kg Net Weight of aerosol forming compound 3,5 kg Overall dimensions Diameter 217 mm Height 441 mm Starter type VR-7.5, VRTH VEL, VELTH Starter electric impedance 7,5 Ohm 2,5 – 4 Ohm Starting impulse minimum current 1A 0,4 A Starting impulse voltage 8 – 30 V 1,5 – 24 V Starting impulse duration Not less than 1,5 sec Not less than 0,1 sec Startup delay < 1,5 sec Operating conditions Temperature ± 50 °С Humidity up to 98 % Acceleration at frequency range up to 100 Hz 1g
Certificates available on request. Please complete the form below.
Manual is available on request. Please complete the form below.