AGS-2/4 Aerosol Fire Extinguisher

AGS-2/4 Aerosol Fire Extinguisher
21 m3 45 sec 4,6 kg

Description

DESIGN: AGS-2/4 aerosol fire extinguisher generates dry aerosol cloud which extinguishes fire upon reaching necessary concentration in protected volume. AGS-2/4 aerosol fire extinguisher has steel cylinder body with nozzle cap on top. Despite its compact size AGS-2/4 aerosol fire extinguisher has large protected volume 21 m3. Outer aerosol stream temperature is lowered by contact cooler. AGS-2/4 has a number of modifications of mount types and directions of aerosol stream.

OPERATION: Electric signal activates the built-in starter unit which ignites the aerosol forming cartridge. Aerosol cartridge produce large volume of fire extinguishing aerosol streaming through the cooling layer and coming out of fire extinguisher through the nozzles. Thanks to its unique properties aerosol stops the fire and prevents its following reignition.

APPLICATION: AGS-2/4 aerosol fire extinguisher is recommended for protection of various types of transport and the premises of medium volume.

WARRANTY: Manufacturer guarantees that fire extinguisher conforms to declared technical specs and standards if the consumer strictly follows the Instruction Manual.

Warranty period – 18 months
Operation life – 5 years
Service life – 10 years

Technical Information

  • Fire classes      
    Net Weight 4,6 kg
    Net Weight of aerosol generating cartridge 1,6 kg
    Protected volume 21 m3
    Operating time 45 ± 4,5 sec
    Overall dimensions
    Diameter 167 mm
    Height 175 mm
    Starter type VR-7.5, VRTH VEL, VELTH
    Starter impedance 7,5 Ohm 2,5 – 4 Ohm
    Starter minimum current 1A 0,4 A
    Starting voltage 8 – 30 V 1,5 – 24 V
    Starting impulse duration Not less than 1,5 sec Not less than 0,1 sec
    Delay of generator start up < 1,5 sec
    Operating conditions
    Temperature range ± 50 °С
    Humidity up to 98 %
    Acceleration at frequency range up to 100 Hz 1g
  • AGS-2/4-1-1
    axial aerosol outflow,
    flange mount
    AGS-2/4-2-1
    radial aerosol outflow,
    flange mount
    AGS-2/4-1-4
    axial aerosol outflow,
    bracket mount
    AGS-2/4-2-4
    radial aerosol outflow,
    bracket mount
  • Certificates

    Certificates available on request. Please complete the form below.

  • Manual

    Manual is available on request. Please complete the form below.

Request Quotation

Invalid Input
Invalid email address!
Invalid Input

Share this product

Leave a comment

Please login to leave a comment. Optional login below.